A new method for calculating saddle seat height with an emphasis on optimal posture based on trigonometric relations

Introduction. Based on the literature, the ergonomic saddle chair provides the most appropriate posture for users. Determination of the seat height is critical to establish the proper posture, carried out using various methods of anthropometry. This study aimed to develop a simple and applied method for determining the saddle seat height with an emphasis on appropriate posture. Methods. In this study, anthropometric dimensions including weight, body height, popliteal height and seat height at 135° knee angle in 150 male and female dentists were measured. In the laboratory, to determine the ‘acetabuloischial number’, 25 male and female natural hip bones were measured. The mean saddle-chair height with knee angle of 135° was then compared by two different methods, field measurement and the new calculation method. Results. The results showed a strong correlation between data gathered from the two different methods, the field measurement and the new calculation method (98%), and Cronbach’s α from the intraclass correlation was equal to 0.994 (p?<?0.05). This indicated that the two methods produced similar results. Conclusion. The new method can be applied to calculate the optimal height of the saddle seat based on body height and popliteal height.     

Complexing agents for metal removal using ultrafiltration membranes: a review

Environmental Chemistry Letters - Water pollution by human activities is major issue. In particular, toxic metals are of particular concern, thus calling for advanced methods to remove metals from...     

Evaluation Of Ground Water Quality In Dakhla Oasis (Egyptian Western Desert)

Chemical analyses of ground water and soil samples at Zakhera Village (Dakhla Oasis, Egyptian Western Desert) were carried out on ten artesian wells. The interrelationships between the major and minor ions' behaviour and the prevailing geological and environmental conditions were examined. Ground water quality varies widely, even at short distances, depending on hydrogeological conditions, pumping period, depth of aquifer, type of soil, and human activities. Significant differences of the flux coefficient values for metals and non-metals were observed as a result of the redox status of their environment and adsorption phenomena. Water quality index (WQI), and saturation index (SI) indicated the suitability of these samples for different uses.     

Effect of fertilizer application on soil heavy metal concentration

A large amount of chemicals is annually applied at the agricultural soils as fertilizers and pesticides. Such applications may result in the increase of heavy metals particularly Cd, Pb, and As. The objective of this study was to investigate the variability of chemical applications on Cd, Pb, and As concentrations of wheat-cultivated soils. Consequently, a study area was designed and was divided into four subareas (A, B, C, and D). The soil sampling was carried out in 40 points of cultivated durum wheat during the 2006–2007 periods. The samples were taken to the laboratory to measure their heavy metal concentration, soil texture, pH, electrical conductivity, cationic exchange capacity, organic matter, and carbonate contents. The result indicated that Cd, Pb, and As concentrations were increased in the cultivated soils due to fertilizer application. Although the statistical analysis indicates that these heavy metals increased significantly (P value < 0.05), the lead and arsenic concentrations were increased dramatically compared to Cd concentration. This can be related to overapplication of fertilizers as well as the pesticides that are used to replant plant pests, herbs, and rats.     

Assessment of metals in soil extracts and their uptake and movement within Tamarix nilotica at Lake Nasser banks, Egypt

This study aims to determine heavy-metal levels in soil from the banks of Lake Nasser, the ability of Tamarix nilotica to accumulate such metals from soil and hence its potential for phytoextraction. Soil and Tamarix samples were collected from the banks of four bights around Lake Nasser and analysed for Fe, Mn, Ca, Mg, Cr, Cu, Ni, Zn, Cd and Pb by atomic absorption spectrometry, whereas Na and K were measured by atomic emission spectrophotometry. Three different methods of extraction were used for the soil samples. Lead, copper and zinc were equally distributed between the exchangeable phase and Fe/Mn oxide-bound form, while other measured metals were mainly present in the Fe/Mn oxide fraction. With the exception of iron, all metals studied showed total concentrations within the geochemical background values. T. nilotica exhibited elevated concentrations of Na (36.2-48.5 mg g^-1) and K (2.74-4.33 mg g^-1) in stems, and relatively high concentrations of Pb, Cd and Co (0.39-1.03 µg g^-1, 0.24-1.3 µg g^-1 and 1.94-5.3 µg g^-1, respectively) are found in plant leaves. Bioaccumulation factors of Na and K (9.3 and 12.63, respectively) were high in T. nilotica stems. While the bioaccumulation of Pb, Cd, Co and Ni (2870.1, 2035.4, 10.5 and 5313.2, respectively) was high in plant leaves, Fe, Mn, Ca and Mg were accumulated relatively equally in plant stems and leaves. T. nilotica was found to secrete high amounts of Na, Ca and K, in addition to small amounts of all accumulated metals except Cd and Cu. These secreted metals appeared as salt crystals (67.5% Na; 25.8% Ca; 5% Mg; 1.5% K and 0.16% trace and minor elements) on the plant surface. The concentrations of all the metals studied in T. nilotica were higher than in the salt crystals. Statistical analysis of the database suggests bioaccumulation of these metals from soil to T. nilotica. This reflects the importance of using T. nilotica as a model in the phytoremediation process as an established environmental clean-up technology.     

Modeling of Flow Field and Heat Transfer in a Copper-Base Automotive Radiator Application

This paper describes a methodology used for designing louvered fins. Louvered fins are commonly used in many compact heat exchangers to increase the surface area and initiate new boundary layer growth. Detailed measurements can be accomplished with computational models of these louvered fins to gain a better understanding of the flow field and heat distribution. The particular louver geometry studies for this work have a louver angle of 23° and fin count of 17 fpi.

The flow and heat transfer characteristics for three-dimensional mixed convection flows in a radiator flat tube with louvered fins are analyzed numerically. A three-dimensional model is developed to investigate flow and conjugate heat transfer in the copper-based car radiator. The model was produced with the commercial program FLUENT. The theoretical model has been developed and validated by comparing the predictions of the model with available experimental data. The thermal performance and temperature distribution for the louvered fins were analyzed and a procedure for optimizing the geometrical design parameter is presented.

One fin specification among the various flat tube exchangers is recommended by first considering the heat transfer and pressure drop. The effects of variation of coolant flow conditions and external air conditions on the flow and the thermal characteristics for the selected radiator are investigated also. The results will be used as fundamental data for tube design by suggesting specifications for car radiator tubes.     

Physicochemical characteristics and distribution of some metals in the ecosystem of Lake Nasser,Egypt

To know the interrelationship between some metals in different ecosystem components (water, sediment, aquatic plant and fish), many samples from these components were collected from four bights at the Nasser Lake, Egypt, and analyzed for Fe, Mn, Zn, Ca, Mg, Pb, Cd, Ni, Co, Cu and Cr using atomic absorption spectrophotometer. Different distribution factors (bioaccumulation factor – BF, discrimination factor – DF and enrichment factor – EF) were applied on the results of analysis. Data showed that the relatively high concentration of measured metals in water samples are derived from fish farms, and discharge of tourism and trade ships. Applying single leaching sequential technique on sediment samples, using different extracting solutions, revealed a strong ability of trace metals to adsorb on or co-precipitate with amorphous Fe/Mn oxides. High concentrations of Fe, Mn, Co and Ni were measured in the intestine while high Cd and Cr concentrations were recorded in the stomach in both Tilapia (nilotica and galilea). Tilapia galilea accumulated high Pb, Cu and Zn concentrations in their stomach, while in nilotica high concentrations of Pb, Cu and Zn were measured in the intestine, liver and muscles, respectively. Myriophyllum spicatum (an aquatic plant) in the lake recorded high concentrations of Fe, Mn and Zn. Bioaccumulation factors of studied elements in the different bights components indicate that the elevated concentration of measured elements in the aquatic plant and Tilapia (nilotica and galilea) are derived from water, reflecting the increase of human activities in Nasser Lake in recent years. However, the present study concluded that all the elements studied were still below the natural back-ground levels, except Zn and Cu.     

Acute toxicity of potassium permanganate to Caspian roach Rutilus rutilus caspicus in two size classes and under different aeration conditions

Caspian roach, Rutilus rutilus caspicus, might experience potassium permanganate (PM) toxicity, because it is common and widely used disinfectant in fish rearing and propagation centers in Iran. Thus, acute toxicity (24-h-LC₅₀) of PM was determined on Caspian roach in two size classes (small and large groups), under aerated and non-aerated conditions, using static non-renewal system. 24-h-LC₅₀ for PM in Caspian roach was 3.2, 3, 3.2, and 2.8?mg?L^?1 in large-aerated, large-non-aerated, small-aerated, and small-non-aerated groups, respectively. Results indicated that aeration was led to decrease in PM toxicity, regardless of size class. However, large fish showed more tolerance to PM toxicity compared to small ones, under non-aerated condition. It is concluded that aeration could decrease the toxicity of PM that seems to be due to the increase in PM degradation, derived from increase in water turbulence. It is suggested that 96-h-LC₅₀ may be more suitable to determine the effects of fish size on PM toxicity than 24-h-LC₅₀.     

Toxicity of depleted uranium on isolated liver mitochondria: a revised mechanistic vision for justification of clinical complication of depleted uranium (DU) on liver

Depleted uranium (DU) is widely used in military anti-armor weapons. Recent evidence suggested that oxidative stress and mitochondrial dysfunction may contribute to DU-induced toxicity. However, the underlying mechanisms of DU toxicity in mitochondria are not well understood. In this study, liver mitochondria were obtained from Wistar rats treated with DU in the form of uranyl acetate (UA) (0.5, 1 or 2 mg/kg i.p.) using differential centrifugation. For in vitro experiments, control rat liver mitochondria were incubated with different concentrations of UA (50, 100 or 200 μM) for 1 hr. Mitochondrial reactive oxygen species (ROS) production, collapse of mitochondrial membrane potential, and mitochondrial swelling were examined by flow cytometry. Mitochondrial sources of ROS formation were determined using specific substrates and inhibitors. Extent of lipid peroxidation (LPO) and glutathione (GSH) oxidation, and also complex II and IV activities were detected via spectroscopy. Further, the concentration of ATP and ATP/ADP ratio was measured using luciferase enzyme and release of cytochrome c from mitochondria which was detected by ELISA kit. UA induced succinate-supported mitochondrial ROS production, elevated LPO levels, GSH oxidation, and mitochondrial complex II inhibition. UA also induced mitochondrial permeability transition and increase in cytochrome c release which subsequently disturbed oxidative phosphorylation and reduced the mitochondrial ATP concentration. Data suggest that mitochondrial oxidative stress and uncoupling of oxidative phosphorylation may play key roles in DU-induced hepatic toxicity.